Planer

General

planer-1Planer

  • Top access panel for easier service and maintenance
  • Side cutting bits for improved joint bond between different layers of asphalt
  • Hydraulic side shift for milling close to walls and curb
  • Water kit available for dust control

The planer is equipped with direct-drive and high-torque hydraulic motor.
This low maintenance attachment efficiently mills asphalt or concrete.
The planer features hydraulic side-shift for planing close to walls and curbs while easily repositioning the drum for another pass.The self-leveling planer also have the feature of maintaining a constant planing depth independently from the position of the planer (if the loader curl/arm position change or if the loader drives over bump or debris).Depth control and ski depth are visible from the operator's seat.

Features and benefits

Main features

  • Top access panel–for easier bit service and maintenance.
  • Side cutting bits–to decrease drum binding in the cut and to produce a vertical edge  for improving the joint bond between a new layer of asphalt and the existing layer.
  • Hydraulic side-shift–for planing close to walls and curbs, and to easily reposition the drum for another pass.
  • Oscillating planer housing–for planing sloping surfaces or to match two uneven surfaces.
  • Rear frame wheels–to provide support and reduce tire bounce while planing.
  • Direct-drive high torque motors–for low maintenance and high efficiency.
  • Bob-Tach™ mounting system with quick-connect controls–for fast, easy attachment changes.
  • Independent constant depth control (for Self-Leveling Planer only)

Specifications

Pallet Forks, Standard

Open All Close All pdf

Applications

  • Construction
  • Pavement repair

Main features

  • Top access panel–for easier bit service and maintenance.
  • Side cutting bits–to decrease drum binding in the cut and to produce a vertical edge for improving the joint bond between a new layer of asphalt and the existing layer.
  • Hydraulic side-shift–for planing close to walls and curbs, and to easily reposition the drum for another pass.
  • Oscillating planer housing–for planing sloping surfaces or to match two uneven surfaces.
  • Rear frame wheels–to provide support and reduce tire bounce while planing.
  • Direct-drive high torque motors–for low maintenance and high efficiency.
  • Bob-Tach™ mounting system with quick-connect controls–for fast, easy attachment changes.

DescriptionItem numberCompatible with loader
Planer 14in, Standard Flow 7188704 S130-E, S150-E, S160-E, T190-E, T320-B, S630-E, S185-E, S175-E, T190-B, S250-B, S650-E, T650-E, S205-E, S770-E, T770-E, A770-E, S510-E, S530-E, S550-E, S550-B, S570-E, S590-E, T590-E
Planer 16in, Surface 6905792 S160-E, T190-E, T320-B, S185-E, S175-E, T190-B, S250-B, S630-E, S650-E, T650-E, S205-E, S530-E, S550-E, S550-B, S570-E, S590-E, T590-E
Planer 18in, High Flow 7188703 S160-E, T190-E, T320-B, S185-E, S175-E, T190-B, S250-B, S630-E, S650-E, T650-E, S205-E, S530-E, S550-E, S550-B, S570-E, S590-E, T590-E
Planer 24in, High Flow 7184349 T190-E, T320-B, S185-E, S175-E, S175-E, T190-B, S250-B, S630-E, S650-E, T650-E, S205-E, S530-E, S530-E, S550-E, S550-E, S550-B, S550-B, S570-E, S570-E, S590-E, S590-E, T590-E, T590-E
Planer 102 cm 6726632 S850-E, S630-E, S650-E, T650-E, S770-E, A770-E, T770-E, T870-E

DescriptionItem numberMaximum cutting width (mm)Cutting depth (with std drum) (mm)Max. cutting angle ± (°)Side shift (mm)Planing distance next to curb (mm)
Planer 102 cm 6726632 1016.0 130.0 8.0 650.0 65.0

dimension-planer

DescriptionItem numberOperating weight (kg)Shipping weight (kg)Overall length (A) (mm)Overall width (B) (mm)Overall height (C) (mm)
Planer 102 cm 6726632 1043.0 1087.0 1118.0 1727.0 813.0