Lưu ý
  • There was a problem rendering your image gallery. Please make sure that the folder you are using in the Simple Image Gallery Pro plugin tags exists and contains valid image files. The plugin could not locate the folder: images/stories/galleries//e80




E08 – Lý tưởng cho các ứng dụng các dòng xe lớn hơn không làm việc được. 

  •  - Kết cấu khung sườn lưỡi ủi và máy xúc có thể thụt thò tay cần  nên thiết bị làm việc rất ổn định và dễ dàng làm việc trên công trình nhỏ hẹp
  •  - Hệ thống thủy lực mạnh mẽ đáp ứng công việc chuyên nghiệp
  •  - Hoạt động bền bỉ và tuổi thọ phục vụ dài lâu .
  •  - Kích thước nhỏ gọn, trọng lượng nhẹ dễ dàng vận chuyển thiết bị.

Xe xúc mini E08 rất dễ dàng được vận chuyển đến công trình và nó có thể tự di chuyển đi qua hầu hết các cửa ra vào loại tiêu chuẩn.

 Phần kết cấu thụt thò tay cần  của dòng xe này rất ổn định với kích thước máy hiện có, trong khi đó nhờ hệ thống co duỗi thiết bị này cũng dễ dàng đi qua được cửa mở hẹp. Về tổng thể, phần trên gấp được, chiều rộng 710 mm, xe này không có cabin kín.

 Người vận hành sẽ thấy thoải mái khi xe có độ rung và độ ồn thấp, thiết bị thân thiện giảm tối đa tác động đến môi trường.

 Động cơ khá mạnh, do vậy có thể sử dụng các công cụ làm việc cho  phá dỡ công trình hoặc xây dựng hay các ứng dụng khác. Kết cấu máy này có phần xoay toa phía đuôi máy không tăng chiều dài, do vậy giảm đáng kể hư hại khi xoay toa làm việc. Đồng thời máy đáp ứng  thời gian làm việc lâu dài nên giảm thấp đáng kể tổng chi phí cho người chủ sở hữu.

 Việc sử dụng vỏ thép và phần đối trọng được đúc với chất lượng cao giúp cho tăng khả năng bảo vệ ở các góc cạnh cũng như tăng độ bền thiết bị.

Hãy liên hệ với chúng tôi – Đại lý của Bobcat để biết thêm thông tin chi tiết

Features and benefits

Transportability on trailer

Compactness - 710 mm minimum widthThanks to their compact design, both the E08 and E10 can pass through most door sizes. Without any tools, the TOPS can be folded down quickly and is integrated into the frame to minimize the overall width of the machine. The front blade and the undercarriage are retractable to achieve this reduced width, and in normal operation will provide top class stability.


The expandable undercarriage provides the Bobcat E08 and E10 with one of the widest stances in the micro excavator segment (1000 mm and 1100 mm respectively). The resulting “square” footprint provides unsurpassed stability. Added to this is a workgroup featuring a box structure design, providing strength while minimizing overall weight of the workgroup.

Blade Extensions

The sliding blade extensions eliminate loose parts that require storage space and are easily lost. Simply slide them to the inner position to reduce the overall width.

Foldable TOPS

The unique design allows the operator to fold down the TOPS in just a few seconds. Two pins lock the TOPS in place while operating the machine but allow for quick, efficient removal and installation when passing through narrow spaces. The unique feature is the integration of the TOPS into the upper structure which reduces the overall width of the machine and eliminates any bulges on the sides.

Minimal Tail Swing offset

Keeping in mind the request from the customers, the E08 offers a minimal tail swing of only 5 cm – some manufacturers would like to achieve this on their ZTS machines – to provide even greater lifting capacity.

Steel covers

The use of metal covers and a large cast counterweight provides excellent corner protection and extra durability. Durability is important for machines of this class, as they usually work in confined spaces and are frequently used by inexperienced operators.

Cylinder over boom and internal hose routing

The workgroup of these excavators features a cylinder over boom design eliminating the possibility to damage the cylinder. The hoses for the auxiliary hydraulics are routed inside the boom to prevent any damage when working. These two features help to increase the durability.

Easy service access and long intervals

Right from the start, we paid particular attention to easy service access: these units have a single access point for the daily maintenance of all the main components, for checking the fuel gauge and refuelling through the lockable cap.

Engine and cooling

These new excavators use the same engine as the 319, 321 and 323 excavators. This provides proven reliability as well as low vibration and noise levels which are a must when working in confined areas.
The cooling system delivers best in class performance. This is critical when working in confined areas where air flow may be minimal. When the machine is frequently used with a hydraulic breaker, the “demolition kit” will provide extra cooling so the breaker can be used 100% of the time even in warm environments. This is unique in the market and makes these two models ideal for in-door demolition applications



Open All Close All pdf

Operating weight with standard bucket, excluding operator 1,138 kg
Ground pressure 28.8 kPa


(A) Bucket pivot angle 196 °
(B) Maximum reach of working equipment 3,145 mm
(C) Maximum reach at ground level 3,093 mm
(D) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 1,374 mm
(E) Maximum blade height 196 mm
(F) Maximum blade depth 230 mm
(G) Maximum height of working equipment with dipperstick retracted 1,899 mm
(H) Maximum bucket tooth height 2,685 mm
(I) Maximum dump height 1,818 mm
(J) Maximum depth of vertical wall which can be excavated 1,383 mm
(K) Maximum digging depth 1,820 mm


() (* Dentoes values which long dipperstick installed)
(A) Blade height 220 mm
(B) Clearance, upper structure to ground line 363 mm
(C) Ground line to top of engine cover 992 mm
(D) Length of track on ground 968 mm
(E) Machine centre line to blade 987 mm
(F) Minimum radius in travel position 2,153 mm
(G) Overall length of track assembly 1,280 mm
(H) Overall length in travel position 2,793 mm
(I) Track lug height 16 mm
(J) Blade width (extensions not extended) 710 mm
(K) Height 2,209 mm
(L) Track width 180 mm
(M) Machine centre line to working equipment centre line, left-hand rotation 413 mm
(N) Machine centre line to working equipment centre line, right-hand rotation 471 mm
(O) Minimum turning radius 1,121 mm
(P) Swing clearance, rear 550 mm
(Q) Working width at maximum right-hand rotation 1,220 mm
(R) Working width at maximum left-hand rotation 1,163 mm

Make / model Kubota / D722-E2B-BCZ-6 (TIER2)
Fuel Diesel
Number of cylinders 3
Displacement 0.7 L
Maximum net torque at 1400 RPM (SAE J1995) 39.1 Nm

Digging force, dipperstick (ISO 6015) 5,550 N
Digging force, bucket (ISO 6015) 8,294 N
Drawbar pull 9,905 N
Travel speed 2.1 km/h

Pump type Double gear pump
Pump capacity 20 L/min
Auxiliary flow 20 L/min
Auxiliary relief 185.0 bar
Relief pressure for implement circuit 185.0 bar

Boom swing, left 70 °
Boom swing, right 70 °
Slew rate 9 RPM

Cooling system 3 L
Engine lubrication plus oil filter 3.5 L
Fuel reservoir 16 L
Hydraulic system 9.4 L

Noise level LpA(EU Directive 2000/14/EC) 80 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)

  • 710 mm dozer blade / 1000 mm extended
  • 180 mm rubber track
  • Auxiliary hydraulics
  • Control console locks
  • Horn
  • Hydraulically expandible undercarriage from 710 to 1000 mm
  • Retractable seat belt
  • Spark arrester muffler
  • Suspension seat with high back
  • TOPS canopy (1)
  • Vandalism protection
  • Work lights
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1)Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117

  • Auxiliary double action
  • Auxiliary quick coupler
  • Beacon kit
  • Demolition kit
  • Keyless start
  • Travel motion alarm
  • Strobe