E14 Facelift

General

E14 – Thiết kế đặc biệt phù hợp để được di chuyển trên moóc kéo.

• - Kết cấu nhỏ gọn – dễ dàng vận chuyển bằng moóc tải trọng nhẹ.
• - Dễ dàng bảo dưỡng bảo trì
• - Phần kết cấu cơ sở  có thể co duỗi, thụt thò
• - Hệ thống thủy lực trợ lực – có 2 hướng điều khiển – ứng dụng nhiều hơn các công cụ làm việc

 Xe xúc E14 là xe xúc mini thuộc nhóm 1 – 2 Tấn

 Là dòng xe trọng lượng nhẹ được phát triển để dễ dàng di chuyển trên xe moóc và được kéo bằng xe tải nhỏ, xe khách nhỏ hoặc thậm chí được kéo bằng xe hơi, xe xúc E14 rất phù hợp nhiều ứng dụng (như công trình hạ tầng dân sinh, công cộng, xây dựng với đa chức năng …)  và lĩnh vực cho thuê.

 Với thân máy cơ sở co duỗi, thụt tho được  cho phép máy có độ ổn định rất cao. Loại xe này cũng thích hợp đi qua lối vào nhỏ hẹp nhờ khả năng linh hoạt của máy.

 Thợ vận hành sẽ thấy thoải mái như : lối vào rất dễ dàng, bố trí bên trong cabin và hệ thống điều khiển đáp ứng được những yêu cầu khe khắt của khách hàng. Phiên bản chỉ có mái che cho phép vào khu vực điều khiển bằng cả 2 phía của máy xúc.

 Phần đuôi máy rộng nên rất đễ tiếp cận để bảo dưỡng và sửa chữa máy

 Xe xúc E14 được trang bị động cơ KUBOTA, động cơ loại này cung cấp công suất cao hơn đồng thời mức tiêu thụ nhiên liệu cũng hơn so với các sản phẩm cùng loại.

 Dòng xe này được trang bị hệ thống thủy lực phụ trợ với lưu lượng 32,5 lít/phút với 2 hướng điều khiển đáp ứng một cách hiệu quả nhiều công cụ làm việc khác nhau.

 Hãy liên hệ với chúng tôi – Đại lý của Bobcat để biết thêm thông tin chi tiết

Features and benefits

New on the E14 Facelift

The E14 Facelift offers better standard equipment including ergonomic travel levers and pedals, easy to clean floormat with Bobcat logo and storage box under the seat.
The factory- installed optional equipment now includes some significant improvements like a suspension seat or a Bobcat Heavy Duty radio (for machines equipped wit a cab). 4 tie downs can be added to attach and tide the machine on a trailer (they are not meant to lift the machine).  The blade extensions can now be ordered with rubber pads to protect the tarmac when the blade is pushed on the ground. The left-hand blade extension can be reverted with the right-hand blade extensions to position the rubber pads on the top when not needed. Auxiliary lines and their quick connectors can now be located on the arm.

Digging force, lifting capacity and smooth operation

The E14 offers top performance with powerful breakout forces and smooth hydraulics for precise movements. These features are especially advantageous when working in tight spaces. These features combined with faster cycle times allow the E14 to achieve levels of productivity similar to those of larger excavators.

Breakout forces
The use of oversized cylinders in the workgroup and a top class hydraulic design means that the E14 achieves digging forces superior not only to major competitive models but also to previous Bobcat models.

Lifting capacity
The E14 is able to hold more than 300 kg which is very useful when unloading materials on the construction site.

Smooth operation
Forces are of limited use if they cannot be controlled. This is why special attention was given to hydraulic smoothness and accuracy when designing these excavators. Thanks to this smoothness, working in confined areas is easier and the operator can be more relaxed.

Stability

Stability is essential to make good use of the digging forces and lifting capacities. Optimum stability is achieved by expanding fully the retractable undercarriage and using the long dozer blade.

Retractable undercarriage and dozer blade
When fully retracted, the undercarriage allows the excavator to go through narrow spaces while, when fully expanded, it provides optimum stability for the excavator, especially over the side. Expansion and retraction is simple and easy, via an electric switch on the control panel.

Long dozer blade
In addition to help to dustpan on the front, the long dozer blade improves significantly the stability at the front of the excavator, allowing the operator to make full use of the breakout forces that the machine can deliver.

Durability & Reliability

The durability and reliability of a machine have an important influence on its overall lifetime operating cost. Bobcat uses computer-aided design techniques, highly durable materials and structures which are tested under extreme conditions.

Steel tailgate
The protective tailgate, which also acts as a counterweight, is made of 4 mm thick steel. It covers the entire rear of the excavator. Since it is made of hardened steel, the durability is excellent. In case of accidents, rework is easy and low cost. Fully open, the tailgate provides ready access to all the components for daily maintenance.

Cylinder over the boom (COB) design
Located over the boom, the cylinder is protected against contact from attachments or stones inside the bucket. This increases the reliability, especially important in small excavators where the boom and attachments are close to each other.

Oversized cylinder diameters
The oversized cylinder diameters not only increase the forces in the workgroup, but also improve cylinder resistance and extend significantly cylinder life.

Pipes inside the boom
All the pipes and hoses, including the auxiliary lines, are routed inside the boom and dipperstick. This not only protects the hydraulic lines, but also offers improved visibility for the operator. The design of the end of the boom castings allows for easy replacement of the hoses, if required.

4-plate boom design with internal welding
The design of the end of the boom castings allows for easy replacement of the hoses, if required.
The use of a 4-plate boom design allows internal welding for improved strength of the boom and increased reliability of the workgroup

Unparalleled operator comfort

The oversized cab provides more space and comfort for the operator, allowing work for longer periods of time with less fatigue. Access to the seat is convenient thanks to the large door width and the console that rises completely out of the way.
In addition, when not in use, foldable pedals increase room for the feet.
Travel pedals are standard. The second speed is a factory option for the E14.

Service access

Thanks to the large steel tailgate mentioned previously, all components for daily maintenance are easy to access, reducing downtime to a minimum.

Specifications

E14

Open All Close All

(A)	Bucket pivot angle	196 °
(B)	Maximum reach of working equipment	3,980 mm
(C)	Maximum reach at ground level	3,936 mm
(D)	Maximum working equipment radius with boom at maximum height and dipperstick fully retracted	1,551 mm
(E)	Maximum blade height	293 mm
(F)	Maximum blade depth	383 mm
(G)	Maximum height of working equipment with dipperstick retracted	2,390 mm
(H)	Maximum bucket tooth height	3,398 mm
(I)	Maximum dump height	2,318 mm
(J)	Maximum depth of vertical wall which can be excavated	2,010 mm
(K)	Maximum digging depth	2,301 mm

()	(* Dentoes values which long dipperstick installed)
(A)	Blade height	210 mm
(B)	Clearance, upper structure to ground line	421 mm
(C)	Ground line to top of engine cover	1,299 mm
(D)	Length of track on ground	1,006 mm
(E)	Machine centre line to blade	1,260 mm
(F)	Minimum radius in travel position	2,685 mm
(G)	Overall length of track assembly	1,354 mm
(H)	Overall length in travel position	3,753 mm
(I)	Track lug height	25 mm
(J)	Blade width	980 mm
(K)	Height	2,157 mm
(L)	Track width	200 mm
(M)	Machine centre line to working equipment centre line, left-hand rotation	480 mm
(N)	Machine centre line to working equipment centre line, right-hand rotation	605 mm
(O)	Minimum turning radius	1,179 mm
(P)	Swing clearance, rear	1,068 mm
(Q)	Working width at maximum right-hand rotation	1,873 mm
(R)	Working width at maximum left-hand rotation	1,722 mm

Gallery

Video