E26

General

e26

E26 – Tăng tốc êm thuận.

  • - Dễ dàng vận chuyển và ổn định vượt trội.
  • - Hệ thống thủy lực mạnh mẽ và vận hành êm thuận
  • - Thoải mái tiện nghi cho thợ vận hành
  • - Độ tin cậy và độ bền vượt trội.
  • - Bố trí dễ dàng trong bảo dưỡng sửa chữa

Cũng như thế hệ các máy xúc dòng “ E” khác, máy  xúc Bobcat  E26 đã được thiết kế có độ tin cậy và độ bền rất cao, tiện nghi trong vận hành, hệ thống thủy lực mạnh mẽ vượt trội và điều khiển vận hành kết cấu làm việc êm ái. Máy xúc E25 đã được áp dụng rất nhiều cải tiến và công nghệ mới mà được chưa áp dụng với dòng xe nhỏ gọn tương tự trên thị trường.

Máy xúc E26 có trọng lượng vận hành là 2695 kg (bao gồm cabin và gầu tiêu chuẩn), đây là sự kết hợp để có tính ổn định làm việc tuyệt vời cho máy xúc. Thậm chí với kết cấu máy này khách hàng có thể lựa chọn dùng loại tay cần dài mà không cần phải thêm đối trọng, vẫn nâng cao được khả năng dễ vận chuyển bằng xe moóc kéo.

Các thông tin thêm về dòng xe này – Xin liên hệ với chúng tôi – Đại lý xe Bobcat ở Việt nam.

Features and benefits

Excellent stability and transportability

By optimizing the weight of the workgroup using the proven “4-plate box” technology, the center of gravity has been moved towards the back of the excavator.  As a result, the E26 does not require an additional counterweight when configured with the optional long dipper stick. Thanks to the optimized weight, the E26 can be more easily transported by trailer.

Smooth and powerful hydraulics

Thanks to a new main control valve, optimized pump and higher working pressure, the hydraulic system allows smooth, quick and simultaneous operations in combination with powerful digging forces.

Uncompromised operator comfort

A key feature on the E26 is the incorporation of the same cab used on the Bobcat range 3 to 5 tonne compact excavators. Operator comfort and ample entry space have always been very important features of Bobcat compact excavators, and the Bobcat E26 does not compromise these features. This also counts for the improved operator noise level.

• Joystick controlled boom swing
Boom swing is controlled by a thumb wheel located on the left joystick, instead of the pedal control used on many competitive machines of this size. This feature allows for improved controllability (metering) of the boom swing as well as offering more floor space for the operator.

• New auto-shift travel motors
A new feature offered by the Bobcat E26 is the auto-shift travel motor which allows an automatic transition of speeds. The machine shifts automatically from low to high speed or vice versa, providing superb travel performance in any working condition. The operator activates this feature by simply pushing the button on top of the blade control lever.

• More ergonomic design
Travel controls with new cast aluminum pedals enable smooth, precise control of the machine. When not in use, the pedals can fold forward for maximum foot room and easy cab clean-out. The travel levers are positioned in adjacent to each other, allowing easy drive control, even with one hand if necessary. This makes it easier to backfill as the operator can steer with one hand while adjusting the blade with the other. Another approach would be to use the floating feature on the blade.

Great reliability and durability

Computer-aided design, highly durable materials and structures which are endurance-tested under extreme conditions contribute to improved reliability and extended service life.

Serviceability

The E26 is designed so all daily maintenance points are easy to access through the rear tailgate, right hand side cover, removable grill and side panels on both sides of the excavator.

Specifications

E26

Open All Close All pdf

Operating weight (MARK) 2,565 kg
Additional weight for cab with heating 130 kg
Additional weight for long dipperstick 10 kg
Ground pressure with rubber tracks 25.5 kPa
Additional weight with counter weight 183 kg

working-range-e26

(A) Bucket pivot angle 185 °
(B) Maximum reach of working equipment 4,552 mm
(C) Maximum reach at ground level 4,678 mm
(C*) Maximum reach at ground level, long dipperstick 4,850 mm
(D) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 2,132 mm
(D*) Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick 2,135 mm
(E) Maximum blade height 385 mm
(F) Maximum blade depth 315 mm
(G) Maximum height of working equipment with dipperstick retracted 3,246 mm
(H) Maximum bucket tooth height 4,272 mm
(H*) Maximum bucket tooth height, long dipperstick 4,473 mm
(I) Maximum dump height 3,057 mm
(I*) Maximum dump height, long dipperstick 3,239 mm
(J) Maximum depth of vertical wall which can be excavated 1,809 mm
(K) Maximum digging depth 2,582 mm
(K*) Maximum digging depth, long dipperstick 2,890 mm

dimension-e26

() (* Dentoes values which long dipperstick installed)
(A) Blade height 330 mm
(B) Clearance, upper structure to ground line 536 mm
(C) Ground line to top of engine cover 1,456 mm
(D) Length of track on ground 1,543 mm
(E) Machine centre line to blade 1,462 mm
(F) Minimum radius in travel position 3,345 mm
(G) Overall length of track assembly 1,965 mm
(H) Overall length in travel position 4,326 mm
(H*) Overall length in travel position, long dipperstick 4,864 mm
(I) Track lug height 25 mm
(J) Blade width 1,515 mm
(K) Height 2,412 mm
(L) Track width 300 mm
(M) Machine centre line to working equipment centre line, left-hand rotation 614 mm
(N) Machine centre line to working equipment centre line, right-hand rotation 735 mm
(O) Minimum turning radius 1,661 mm
(P) Swing clearance, rear 770 mm
(P) Swing clearance, rear with additional counterweight: 840 mm
(Q) Working width at maximum right-hand rotation 1,949 mm
(R) Working width at maximum left-hand rotation 1,675 mm

Make / model Kubota / D1105-E2B-BCZ-2
Fuel Diesel
Number of cylinders 3
Displacement 1,123 cm3
Maximum net torque at 1400 RPM (SAE J1995) 71.2 Nm

Digging force, dipperstick (ISO 6015) 15,800 N
Digging force, long dipperstick (ISO 6015) 13,200 N
Digging force, bucket (ISO 6015) 22,200 N
Drawbar pull 30,200 N
Travel speed, low range 2.4 km/h
Travel speed, high range 4.6 km/h

Pump type Dual outlet variable displacement piston pump with gear pumps
Piston pump capacity 28.8 L/min
Auxiliary flow 48 L/min
Auxiliary relief 180.0 bar

Boom swing, left 60 °
Boom swing, right 60 °
Slew rate 9.3 RPM

Cooling system 4.6 L
Engine lubrication plus oil filter 5.1 L
Fuel reservoir 34.6 L
Hydraulic system 25 L

Noise level LpA(EU Directive 2000/14/EC) 77 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)
Whole body vibration (ISO 2631–1) 0.2 ms-2
Hand-arm vibration (ISO 5349–1) 0.6 ms-2

  • 1515 mm dozer blade
  • 300 mm rubber tracks
  • Auto shift travel
  • Auxiliary hydraulics with Quick Couplers
  • Blade float feature
  • Cab light
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Horn
  • Hydraulic joystick controls
  • Lockable storage compartment
  • Radio/MP3 ready
  • Retractable seat belt
  • Suspension seat with high back
  • TOPS/ROPS* canopy (1)
  • Two-speed travel
  • Work lights (boom and upperstructure)
  • Warranty: 12 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117.

  • Auto idle
  • TOPS/ROPS cab with heater
  • Long dipperstick
  • Additional counterweight
  • 2nd Auxiliary hydraulics
  • Deluxe textile suspension seat
  • Boom safety valve with overload warning
  • Boom & arm safety valves with overload warning
  • AM/FM stereo radio
  • FOGS kit (Overhead guard)
  • Travel motion alarm
  • Steel tracks
  • Beacon kit
  • Left and right mirror kit
  • Additional work light kit
  • Fuel filter with transparent water separator