E62

General

E62 – Tiện nghi và vận hành với kết cấu máy nhỏ gọn.

• -  Cabin tiện nghi và rộng rãi
• -  Tầm nhìn tốt.
• -  Thiết kế xoay toa bằng không
• -  Màn hình hiển thị LCD
• -  Nâng cao lực cắt phá.
• -  Vận hành thủy lực mạnh mẽ và êm thuận.

Xe xúc Bobcat E62 là loại xoay đuôi bằng không, do vậy, khi giữ nguyên vị trí bánh xích và xoay vận hành  không lo va chạm với bất kỳ vật cản nào với phần đuôi xe xúc với tải trọng vận hành 6,2 Tấn. Cabin này được sử dụng chung với xe xúc Bobcat E85, cabin này có không gian rộng rãi, tiện nghi và tầm nhìn tốt. Để đáp ứng tốt cho nhu cầu sử dụng của khách hàng, khách hàng có thể đặt hàng những chọn lựa thêm như xích thép, tay cần dài, thêm đối trọng, van giữ tải cho lưỡi ủi và hệ thống thủy lực phụ trợ thứ ba.

Hãy liên hệ với chúng tôi – Đại lý của Bobcat để biết thêm thông tin chi tiết

Features and benefits

Large and comfortable operator environment

The Bobcat E62 is a reduced tail swing design compact excavator with an operating weight around 6.2 tonne. This models is equiped with the similar cab used on the 8 tonne compact excavator offering great comfort in terms of operator environment, leg room, air conditioning and visibility.

Clear and functional LCD operating system

The operating system is located in front of the operator to provide all the required information within sight. The 5.7" LCD colour panel provides all kinds of additional functionalities, such as auxiliary hydraulic settings, maintenance diagnostics and keyless capabilities.

Versatile auxiliary hydraulics

In terms of auxiliary hydraulics, both the first and second auxiliary hydraulics are standard installed on this model and are propotionally controllable in two directions by the joysticks. The flow of the auxiliary hydraulics is adjustable in order to operate any kind of attachment.

Easy maneouverability when leveling

The travel motors are standard equipped with the auto-shift feature to enhance the manoeuvrability of the model especially for turning and levelling activities, since it automatically shifts down during heavy loads.

Safety features which facilitates regional requirement

The standard boom and arm load holding (safety) valves will support the dealer to apply for a lifting certification and an optional load holding valve is offered on the blade, which would eliminate the blade floating feature. This feature supports the operator to easily level the ground

Market leading fuel efficiency

The engine automatically idles the engine when functions are not used and for four seconds and returns to normal operating throttle when operation resumes, which improves the fuel efficiency. The integrated refueling pump will support the operator to fillup the fuel tank by pumping fuel from any reservoir.

Specifications

E62

Open All Close All

(A)	Bucket pivot angle	179 °
(B)	Maximum reach of working equipment	6,230 mm
(C)	Maximum reach at ground level	6,100 mm
(C*)	Maximum reach at ground level, long dipperstick	6,400 mm
(D)	Maximum working equipment radius with boom at maximum height and dipperstick fully retracted	2,530 mm
(D*)	Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick	2,645 mm
(E)	Maximum blade height	460 mm
(F)	Maximum blade depth	440 mm
(G)	Maximum height of working equipment with dipperstick retracted	4,381 mm
(H)	Maximum bucket tooth height	5,785 mm
(H*)	Maximum bucket tooth height, long dipperstick	6,005 mm
(I)	Maximum dump height	4,045 mm
(I*)	Maximum dump height, long dipperstick	4,260 mm
(J)	Maximum depth of vertical wall which can be excavated	3,125 mm
(K)	Maximum digging depth	3,815 mm
(K*)	Maximum digging depth, long dipperstick	4,115 mm

()	(* Dentoes values which long dipperstick installed)
(A)	Blade height	410 mm
(B)	Clearance, upper structure to ground line	635 mm
(C)	Ground line to top of engine cover	1,620 mm
(D)	Length of track on ground	1,990 mm
(E)	Machine centre line to blade	1,870 mm
(F)	Minimum radius in travel position	4,400 mm
(G)	Overall length of track assembly	2,500 mm
(H)	Overall length in travel position	5,670 mm
(H*)	Overall length in travel position, long dipperstick	5,669 mm
(I)	Track lug height	21 mm
(J)	Blade width	1,980 mm
(K)	Height	2,550 mm
(L)	Track width	400 mm
(M)	Machine centre line to working equipment centre line, left-hand rotation	605 mm
(N)	Machine centre line to working equipment centre line, right-hand rotation	829 mm
(O)	Minimum turning radius	2,530 mm
(P)	Swing clearance, rear	1,100 mm
(Q)	Working width at maximum right-hand rotation	2,147 mm

Gallery

Video