T2250, much more than a telescopic handler in a compact package
- Hydrostatic transmission – power, precision and smooth engagement
- Quick-Tach or Bob-Tach™ Systems
- Roomy Cab
- 2 Speed
The T2250 is a compact telescopic handler that perfectly complements the current range as well as the Bobcat skid-steer loaders line.
Are you looking for a single machine to replace your current telescopic handler used in construction and agricultural applications, your industrial fork lift truck used in industrial applications and building material warehouses, your skid-steer loader used in construction, landscaping and parks and your articulated loader used in construction? The T2250 is definitely the right package.
This model offers exceptional versatility thanks to numerous attachments and ease of operation.
Its compactness is ideal for work in tight areas where low height is an advantage.
The hydrostatic transmission offers power, precision and smooth engagement contributing to the overall safety of the machine. Safety of the operator is ensured by the standard Aggravating Movements Arrestor system (AMA).
The T2250 includes the Quick-Tach system, a manually locking “telescopic” type carriage, as standard. Our Bob-Tach™ system, already available on our skid-steer loaders, is optional on the T2250 as well.
The very compact Z bar allows quick and easy dumping of all materials.
This model is equipped with a Tier III compliant engine for reduced engine emission and increased maximum torque from 268 to 275 Nm.
Get even more with tow device and electric auxiliary, matriculation plate, hydraulic lines at boom end and Attachment Control Device (ACD), rotating beacon, back-up alarm, protective grill for windshield, roof glace wiper, air conditioning, wheel wedge, transmission unlocking device, rear hydraulic auxiliary, working light on boom, set of blue lights for henhouses, boom stop, zinc painting, boom float, rear mirror, other color, carriage narrow and hydraulic locking of attachments, Bob-TachTM and manual locking of attachments as factory options.
Looking for more information about the T2250? Get in touch with your local Bobcat dealer. Quickly find the closest Bobcat dealer thanks to our dealer locator.
The T2250 is the ideal machine for work in tight areas where low height is an advantage:
• Height: 1985 mm
• Width: 1838 mm
• Length at the carriage (Bob-Tach): 3980 mm
• Turning radius: 3215 mm
Delivering best-in-class lifting capacity at maximum reach, Bobcat Telescopic Handlers perform any task with ease and safety.
The spacious cab offers the same advantages as the cab used on the current range, easy access, 360° visibility, fully adjustment steering column, adjustable suspension seat. The differences being:
• A width of 845 mm
• An instrument panel like that used in the Toolcat
• A multi-functional proportional joystick
• An inching pedal for precision movement
• An overload system which works together with the Aggravated Movements Arrestor system (A.M.A.)
• All controls and gauges are easy to access and use
Hydrostatic transmission - Power, precision and smooth engagement
All Bobcat telescopic handlers have a simple-to-use, industrial hydrostatic transmission to optimize your productivity.
• Power: Efficiency yield superior to a torque converter
• Precision travel movement thanks to the inching pedal
• Smooth engagement: ease of use in all applications and phases of operationAll features above contribute to the overall safety of the machine. Most large loaders weighing 30 tons or more have a hydrostatic transmission!!
Aggravating Movements Arrestor (AMA)
All Bobcat telescopic handlers feature the AMA, which prevents dangerous machine movements during operation. It is perfectly complemented by the longitudinal stability indicator (LSI), which clearly displays the machine’s longitudinal stability.3 Steering Modes for Ease of Handling:
1. All-wheel steer for on-site handling
2. Crab-steer for positioning loads from side-to-side in restricted areas
3. Front-wheel steer for travel on roads
Reliable and robust: built to last
The ‘full protection’ concept ensures maximum durability through:
• Tilt cylinders and hydraulic hoses protected inside the boom
• Reinforced underside to protect the engine and other vital components when travelling over rough terrainEngine compartment
• Engine mounted lengthwise offering optimal access for maintenance
• Reinforced base of the engine cover with maintenance hatch
• Side protection of the engine compartment
• 90A alternator and 105Ah battery as standard
Base reinforced and protected as on all Bobcat machines
Quick-Tach / Bob-TachTm system
The T2250 is fitted with a manually locking “telescopic” type carriage as standard. Swapping attachments on-site can be done in a jiffy thanks to our strong and robust Quick-Tach.
The Bob-Tach™ is an option and good value mounting systems. It allows to mount attachments from our loader’s range.
The T2250 has a very compact Z bar with a tilt/dump angle of 148º, allowing quick and easy dumping of all materials.
This function, well known on Bobcat loaders, allows the boom to float freely for ground levelling work using the bucket, for example, or using a sweeper.
Speed Management System (SMS)
This system allows the operator to adjust electronically the speed of the T2250 without having to use the inching pedal. For example, this function allows the use of a sweeper on the road at a speed of 2 km/h without using the inching pedal. However, the operator must accelerate to control the hydraulic power of the attachment being used.
Easy maintenance, less downtime
You'll find all the components and service points in the same, easy-to-access place on every machine, thanks to the common platform and consistent design. Maintenance is a breeze and downtime is reduced.The T2250 telescopic handlers are equipped with a new Tier III compliant engine.
|Lifting height (Bob-Tach™)||5,230 mm|
|Lifting height (Quick-Tach)||5,210 mm|
|Rated capacity||2,200 kg|
|Capacity (at max. height)||2,200 kg|
|Capacity at max. reach (Bob-Tach™)||1,000 kg|
|Capacity at max. reach (Quick-Tach)||950 kg|
|Max. reach (Bob-Tach™)||3,010 mm|
|Max. reach (Quick-Tach)||3,030 mm|
|Crowding force||2,100 daN|
|With forks and 14 x 17.5 tyres, with Bob-Tach™||Complies with stability test EN1459 Annex B|
|With forks and 14 x 17.5 tyres, with Quick-Tach||Complies with stability test EN1459 Annex B|
|Weight (unladen)||4,695 kg|
|Low speed (forward/reverse)||7 km/h|
|High speed (forward/reverse)||25 km/h|
|Driving modes||Direct drive / soft drive|
|Main drive||2-speed hydrostatic motor|
|Transmission||Hydrostatic with electronic regulation|
|Make / Model||KUBOTA / V3800-DI Turbo|
|Rated power (DIN 6271) at 2400 RPM||55.9 kW|
|Maximum torque at 1600 RPM||274 Nm|
|Number of cylinders||4|
|Pump type||Gear pump with LS valve|
|Combined pump capacity||85 L/min|
|Working pressure||240 bar|
|Lift time - no load||4.7 s|
|Lower time - no load||6.5 s|
|Telescope in time at max. reach - no load||4.2 s|
|Telescope in time at max. height - no load||4.2 s|
|Telescope out time at max. reach - no load||5.7 s|
|Telescope out time at max. height - no load||5.8 s|
|Parking and emergency brake||Negative brake with hydraulic command|
|Axles and reduction gears front / rear||8.9/5.6 L|
|Engine oil||12 L|
|Fuel tank||91 L|
|Hydraulic reservoir (hydraulic)||29 L|
- Aggravating Movements Arrester (AMA)
- Hydrostatic transmission
- ROPS/FOPS operator cab
- Heating, demisting and ventilation
- Front and rear washer/wipers
- Seat with self-retracting seat belt
- Road lights
- Turn signals
- Right and left side mirrors
- Turbo-charged engine
- Front and rear work lights on cab
- Creep function (or SMS: Speed management system)
- Four Mitas 14 x 17.5 tyres
|Level of acoustic power (LWA)||104 dB(A)|
|Whole body vibration (ISO 2631–1)||1.6 ms-2|
|(-)||Height to steering wheel||1,175 mm|
|(-)||Operator cab inside width||845 mm|
|(A)||Overall length (with forks)||5,330 mm|
|(B)||Overall length (with carriage)||4,145 mm|
|(C)||Overall length (Bob-Tach™ without attachment)||3,984 mm|
|(C)||Overall length (Quick-Tach without attachment)||4,000 mm|
|(E)||Overall height (with rotating beacon)||2,185 mm|
|(F)||Overall height||1,985 mm|
|(G)||Carriage rotation angle||148 °|
|(I)||Height to back of the machine||1,553 mm|
|(J)||Axle centre height||430 mm|
|(K)||Ground clearance (from step)||294 mm|
|(O)||Operator cab outside width||860 mm|
|(P)||Track width (front & rear)||1,485 mm|
|(Q)||Width over standard tyres||1,840 mm|
|(R)||External turning radius (with forks spaced 1200 mm apart)||4,280 mm|
|(S)||External turning radius (at tyres)||3,170 mm|
|(U)||Internal turning radius||1,500 mm|
- Back up alarm