T650

General

t650

T650 – Đạt được ở cấp độ cao hơn

  • - Cabin tối ưu cho thợ vận hành
  • - Tiện nghi
  • - Góc nhìn rộng khắp
  • - Vận hành vượt trội
  • - Nâng cao hiệu suất hữu dụng
  • - Dễ dàng bảo dưỡng sửa chữa

Trải qua hơn 50 năm đi đầu trong lĩnh vực thiết kế và chế tạo thiết bị nhỏ gọn, Bobcat đã bắt đầu trình làng một thế hệ xe đa năng bánh xích hoàn toàn mới ra toàn thế giới như một dòng xe tiêu chuẩn mà khách hàng có thể chọn lựa.

Bobcat là thương hiệu mà cả thế giới biết đến với danh tiếng xe đa năng có độ bền đặc biệt vượt trội. Nhờ vào việc chế tạo co kết cấu hoạt động ở tải trọng nặng, cùng thiết kế và bảo vệ đặc biệt, nâng cao tối đa hiệu quả sử dụng hửu dụng, tiện dụng tối đa, dễ dàng nhất và nhanh nhất cho công việc bảo dưỡng sửa chữa.

Hàng loạt những cải tiến mạnh mẽ đã thực hiện cho dòng xe này. Cabin được thiết kế nổi bật, là loại lớn nhất trên thị trường, nhiều không gian hơn, ít độ ồn hơn, tiện nghi hơn cho người vận hành, giúp nâng cao năng suất lao động và bảo vệ tốt hơn theo cả phía trước và phía sau ngưới vận hành. Cabin này được thiết kế với vị trí người vận hành gần hơn về phía trước giúp góc nhìn tăng lên đáng kể về phía trước cũng như xung quanh. Hơn nữa, công suất động cơ được tăng lên nhiều cùng với hệ thống thủy lực mạnh mẽ giúp cho năng suất làm việc tăng lên rõ rệt. Ngoài ra, xe còn dễ dàng trong bảo trì sửa chữa và nhiều thiết kế hoàn toàn mới giúp nâng cao đáng kể độ bền thiết bị và thời gian vận hành hữu dụng của dòng xe này.

Để có thêm thông tin xin liên hệ với chúng tôi – Đại lý của Bobcat. 

Features and benefits

Operator comfort

The new cab has been built in accordance with the axiom that the more comfortable an operator is, the more productive he will be. The threshold of the cab door has been lowered and the size of the cab door has been increased, making it easier for operators to enter and exit the cab.

Visibility

The new cab offers 30% more visibility all round the loader.

The 5 cm forward positioning of the cab places the operator closer to the attachment. Forward visibility is further enhanced thanks to a 45% larger door and a lower front cross-member on the cab. Also contributing to improved visibility is a 50% increase in the output (total wattage) of the front work lights. There are two bulbs instead of one as in the past. The top window is better sealed, preventing water from entering the cab. The top window of the cab is more than 40% larger.

Performance

Customers requested a more productive loader in a smaller package. With the 600 series loaders, we achieved this through a combination of factors.

Traction on the new generation loaders has been increased by 15 to 20% to provide greater pushing and digging power. The ratios in the transmission were changed.

The standard flow hydraulic efficiency has been increased by over 30%, providing better attachment performance. Hydraulic flow has been increased by 11% or 9 l/min. At the same time, the pressure of the pumps has been increased by almost 14 bar. In addition, the back pressure of the hydraulic system has been reduced by 7 bar.

Reliability / Durability

The new generation loaders are built to work long hours on demanding jobsites.

The hydraulic quick couplers are mounted directly to the front plate of the lift arm. A guard bar extends out in front of the couplers for added protection.

In general, the new series design uses more parallel controlled routings and minimizes the chance of rub points between plumbing components. Components have been re-designed to allow use of straight fittings instead of adjustable fittings. Straight fittings eliminate routing variation by the assemblers due to fitting orientation. The two-speed block is placed directly between the drive motors for short, clean routings. The bucket positioning valve has been relocated to the back right side of the machine. This allows more direct routings from the main control valve to the cylinders. The main control valve is mounted off the transmission and angled at 30° to improve serviceability and assembly.

Serviceability

The transversely mounted engine and swing-open tailgate offer optimum ease of maintenance.
The oil cooler swings up, allowing the area between the oil cooler and the radiator to be cleaned quickly. The holes in the screen are smaller to keep more debris out of the cooler.

A new hydraulic sight gauge helps the operator quickly check hydraulic oil levels.

End-greased pivot pins at key points around the loader simplify greasing of the pins.

The tailgate door now swings open to the left, which makes it easier to refuel the loader when it is transported on a trailer.

An optional High Performance air pre-cleaner dealer kit increases the pre-clean efficiency from 36% to 71% and extends the life of the air filter. It is assembled to the low pressure side of the fan in order to pull dust from the air cleaner.

Specifications

Rated operating capacity, ISO 14397–1 1,271 kg
Tipping load 3,632 kg
Pump capacity 87.1 L/min
Pump capacity (with high flow option) 126.9 L/min
System relief at quick couplers 23.8-24.5 MPa
Max. travel speed 10.6 km/h

Make / Model Kubota / V3307-DI-TE3
Fuel Diesel
Cooling Liquid
Power at 2400 RPM (SAE J1995) 55.4 kW
Power at 2400 RPM (SAE J1995) 55.4 kW
Torque, maximum at 1600 RPM (SAE JI998 Gross) 264 Nm
Number of cylinders 4
Displacement 3,331 cm3
Fuel tank 103.3 L

Operating weight 4,585 kg
Shipping weight 4,322 kg

dimension-t650

(A) Operating height 4,026 mm
(B) Height with operator cab 2,065 mm
(C) Angle of departure 31 °
(D) Ground clearance 406 mm
(E) Ground contact length 1,499 mm
(F) Length without attachment 2,754 mm
(G) Length with standard bucket 3,474 mm
(H) Rollback at ground position 30 °
(I) Dump height with standard bucket 2,447 mm
(J) Height to bucket hinge pin 3,149 mm
(K) Dump reach at maximum height 870 mm
(L) Dump angle at maximum height 42 °
(M) Rollback fully raised at maximum height 97 °
(N) Bucket width, 74–inch 1,880 mm
(O) Turning radius with standard bucket 2,228 mm
(P) Track, 450 mm tracks 1,532 mm
(Q) Width over tracks, 450 mm tracks 1,981 mm

Vehicle steering Direction and speed controlled by two hand levers or joysticks (optional)
Loader hydraulics tilt and lift Separate foot pedals, optional Advanced Control System (ACS), Advanced Hand Controls (AHC) or Selectable Joystick Controls (SJC)
Front auxiliary (standard) Electrical switch on right-hand steering lever

Transmission Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors

  • Adjustable suspension seat
  • Automatically activated glow plugs
  • Auxiliary hydraulics: variable flow/maximum flow
  • Bob-Tach™ frame
  • Bobcat Interlock Control System (BICS)
  • Deluxe operator cab* - Includes interior cab foam, side, top and rear windows, cab door with windshield wiper and sensor, Deluxe wire harness, dome light, electrical power port, cup holder, storage compartment and horn (1)
  • Electrically activated proportional front auxiliary hydraulics
  • Engine/hydraulics system shutdown
  • Hydraulic bucket positioning (including ON/OFF switch)
  • Instrumentation
  • Lift arm support
  • Work lights, front and rear
  • Parking brake
  • Seat belt
  • Seat bar
  • Turbo-charger with approved spark arrestor
  • Tracks — rubber — 450 mm
  • CE certification
  • Warranty: 12 months or 2000 hours, whichever occurs first

(1) * Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

  • Factory Options
    • Deluxe instrument panel
    • Power Bob-Tach™
    • Cab enclosure with heating
    • Air conditioning
    • Advanced Control System (ACS)
    • Advanced Hand Controls (AHC)
    • Selectable Joystick Controls (SJC)
    • Roller Suspension™
    • High flow hydraulics
    • Two speed
    • Air ride seat with 2 point seat belt
    • Air ride seat with 3 point seat belt
    • Back-up alarm
    • Beacon
    • Engine block heater
    • Fire extinguisher
    • Strobe
  • Dealer Installed Options
    • Special applications front door kit
    • Engine block heater kit
    • Deluxe instrument panel
    • Lexan rear window kit
    • Fresh air heater kit
    • 200/300 lbs (74.4/119.9 kg) counterweight kit
    • Bucket positioning kit
    • Plumbing kit for fresh air heater
    • Back up alarm kit
    • FOPS kit **
    • Single-point lift kit
    • Keyless kit
    • Power Bob-Tach™ kit
    • Road kit
    • Rotating beacon kit
    • Fire extinguisher kit
    • Catalytic purifier kit
    • Air conditioning kit
    • Radio kit
    • Pre-cleaner HP aspiration kit
    • 7-pin attachment control kit (standard with T650H)
    • Four-point lift kit
    • Rear auxiliary hydraulic kit

  • Angle Brooms
  • Augers
  • Backhoes
  • Bale Forks
  • Box Blades
  • Breaker Accessories
  • Breakers
  • Brush Saws
  • Bucket Adapters
  • Chippers
  • Combination Buckets
  • Concrete Mixers
  • Concrete Pumps
  • Construction / Industrial Buckets
  • Dozer Blades
  • Drop Hammers
  • Dumping Hoppers
  • Fertilizer Buckets
  • Flail Cutters
  • Graders
  • Grapples, Industrial
  • Landplanes
  • Landscape Rakes
  • Laser Equipment
  • Low Profile Buckets
  • Miscellaneous
  • Mixing Buckets
  • Mowers
  • Packer Wheels
  • Pallet Fork Accessories
  • Pallet Forks, Hydraulic
  • Pallet Forks, Standard
  • Planers
  • Root Grapples
  • Rotary Cutters
  • Rotary Grinders
  • Scarifiers
  • Scrapers
  • Seeders
  • Silt Fence Installers
  • Skeleton Buckets
  • Snow & Light Material Buckets
  • Snow Blades
  • Snow Pushers
  • Snow V-Blades
  • Snowblowers
  • Sod Layers
  • Soil Conditioners
  • Spreaders
  • Stabilizers
  • Stump Grinders
  • Sweepers
  • Tillers
  • Tree Transplanters
  • Trench Compactors
  • Trenchers
  • Utility Forks
  • Vibratory Rollers
  • Water Kits
  • Wheel Saws
  • Whisker Brooms

Operator LpA (98/37 & 474-1) 85 dB(A)
Noise level LWA (EU Directive 2000/14/EC) 103 dB(A)
Whole body vibration (ISO 2631–1) 0.5 ms-2
Hand-arm vibration (ISO 5349–1) 1.6 ms-2